MTC30-12S AC-DC医疗ITE电源模块ARCH
发布时间：2024-04-23 08:51:38 浏览：6462
MTC30 AC-DC医疗电源模块ARCH是一个30瓦的超紧凑型电源模块，尺寸为2.52“ x 1.8” x 0.93“，可以安装在PCB上。它具有通用输入范围90-264VAC，低空载功耗小于0.15W，并通过自然空气对流冷却。该模块具有低漏电流、宽工作温度范围(-40°C~+80°C，降额)、低纹波和噪声、隔离等级II，以及I/O隔离达到4000VAC。可选螺丝端子使其安装更加方便。此外，该模块符合UL/IEC 60950-1、UL/IEC 60601-1医疗安全认证，具有2xMOPP的医疗安全认证，并享有3年产品保修。
尺寸：2.52“ x 1.8” x 0.93“
I/P：90~264VAC
输出：5、12、15、24 VDC
I/O 隔离：4000VAC
工作温度：-40~ +80°C
| Model No. (Single Output) | MTC30-5S | MTC30-12S | MTC30-15S | MTC30-24S | |
| Max Output Wattage (W) | 25W | 30W | 30W | 30W | |
| Input | Voltage | 90-264 VAC or 120-370 VDC | |||
| Frequency(Hz | 47-440 Hz | ||||
| Current (Full load | 650 mA max.(115 VAC)/400 mA max.(230 VAC) | ||||
| nrush current (<2ms,Cold Start) | 30 Amax.(115 VAC)/60 Amax.(230 VAC) | ||||
| Leakage Current | <0.1mA/264 VAC(Touch Current) | ||||
| No Load Input Power (<240 VAC | <0.15W | ||||
| External Fuse (recommend) | 3.15 A slow blow type | ||||
| Output | Voltage (V.DC. | 5V | 12V | 15V | 24V |
| Voltage Accuracy | ±2% | ||||
| Current (mA)ma | 5000 | 2500 | 2000 | 1250 | |
| Line Regulation (LL-HL)(typ. | ±0.5% | ||||
| Load Regulation (10-100%)(typ.) | ±1% | ||||
| Maximum Capacitive Load (at 230 VAC) | 6800uF | 1600uF | 1200uF | 470uF | |
| Ripple &Noise (max.) Note 1) | 100mVp-P | 150mVp-P | 150mVp-p | 240mNp-P | |
| Eficiency (at 230 VAC | 84% | 89% | 86% | 86% | |
| Hold-up Time | 10 ms min | ||||
| Protection | Over Power Protection | Hiocup technique,auto-recovery | |||
| Over Voltage Protection | Zener diode clamp | ||||
| Short Circuit Protection | Hiocup mode (automatic recovery | ||||
| solation | nput-Output (V.AC) | 4000V | |||
| Environment | Operating Temperature | 40°℃…+80°℃(with derating | |||
| Storage Temperature | 40°℃…+90°℃ | ||||
| Max Case Operating Temperature | 84℃ | ||||
| Temperature Coefficient | ±0.05%C | ||||
| Altitude During Operation | 5000m | ||||
| Humidity | up to 95%RH | ||||
| MTBF | >250,000 h@25°C(MIL-HDBK-217F) | ||||
| Atmospheric Pressure | 540 hPa to 1060 hPa | ||||
| Physical | Dimensions (Lx WxH | 2.52x1.8x0.93 Inches(64.1x45.6x23.5mm) Tolerance ±0.5 mm,Height Tolerance±1 mm | |||
| Case Material | Plastic resin (flammability to UL 94V-0) | ||||
| Weight | 135 g | ||||
| Cooling Methoc | Free air convection | ||||
| Safety | Approva | cUL/UL Standard: UL 60950-1,CAN/CSA C22.2 No.60950-1-07 ANSUAAMI ES60601-1 (2005+C1:09+A2:10),CAN/CSA-C22.2 No.60601-1 (2008).2x MOPP CB Standard IEC 60950-1:2005 (2nd Edition)+Am 1:2009+Am 2:2013 EC 60601-1:2005(3rd Edition)+CORR.1 (2006)+CORR.2 (2007)+AM1 2012)or IEC 60601-1 (2012 reprint),2x MOPP | |||
| EMC | Conducted and radiated EM | EN55011 class B (Radiation Class A for MTC30 A2 Series) | |||
| EMS | EN60601-1-24th edition | ||||
深圳市立维创展科技授权代理ARCH电源模块产品，提供高效率，高品质与小尺寸特性的产品满足市场趋势和需求，并提供技术支持服务，欢迎咨询。
推荐资讯
-
VCGA031E替代SDCL1V30可以直接换吗？3×3×1.5mm功率电感选型确认 2026-09-14 16:53:17VCGA031E替代SDCL1V30时，重点核对电感值、DCR、额定电流、饱和电流及封装尺寸。本文结合VCGA031E实际规格，说明两类3×3mm功率电感的替代选型思路。
-
MUN3CAD03-SF替代SY98003怎么选？Cyntec 3A DC/DC电源模块替代选型 2026-09-11 16:51:45MUN3CAD03-SF替代SY98003怎么选？本文从输入电压、输出范围、输出电流、封装及外围设计等方面对比Cyntec MUN3CAD03-SF与SILERGY SY98003，帮助工程师和采购快速判断替代方案。